Example scraper
Pan scraper, designed with Utensil Maker
============================================================

FILES
  model.stl        3D model (STL)
  plan.svg         1:1 plan (SVG)
  plan.dxf         CAD outline (DXF)
  plan-print.pdf   Printable paper plan (PDF)
  model.scad       OpenSCAD source
  fusion360.py     Fusion 360 script with CAM
  README.txt       Instructions
  params.json      Parameters (JSON)

PARTS AND STOCK
  Scraper x1: 104 x 80 mm, 8 mm thick.
    Blank: at least 125 x 100 mm, grain along the length.
  Use a tight-grained hardwood such as maple, cherry, walnut or beech.

PARAMETERS
  Stock
    Stock thickness: 8 mm
    Front edge thickness: 1.8 mm
  Shape
    Length: 105 mm
    Width: 80 mm
    Front edge angle offset: 12 mm
    Front corner radius: 6 mm
    Back corner radius: 22 mm
  Bevel
    Bevel length: 35 mm
  Hang hole
    Hang hole diameter: 8 mm
    Hang hole position: 16 mm

CNC ROUTER (Fusion 360)
  1. In Fusion, create a new empty design.
  2. Utilities > Add-Ins > Scripts and Add-Ins > Create > Script (Python).
     Paste in fusion360.py, save, and run it. It builds the model and one
     CAM setup per part:
       - 3D adaptive roughing of the top face with a 1/4 in flat end mill
       - Scallop finishing with a ball-nose bit
       - Pocketing of slots and holes with a 3/16 in or 1/8 in flat end mill
       - Outline contour with tabs, cut last
  3. Change the tools, feeds and speeds to match your machine, then simulate.
  4. Post-process with your machine's post.
  Workholding: the bottom is flat. Use double-sided tape or screws in the waste.
  The WCS origin is at the top centre of the stock.

OTHER CNC SOFTWARE
  Import model.stl as a 3D model (mm, flat bottom on Z=0) for the top shaping.
  Use plan.dxf (layers OUTLINE and HOLES) for the 2D profile and pocket cuts.

OPENSCAD
  Open model.scad. It rebuilds the same solid and lists the parameters.

BANDSAW AND HAND TOOLS
  1. Print plan-print.pdf at 100% (Actual size). Check the 50 mm square.
  2. Tape the tiles together and stick the plan to the blank.
  3. Drill the ends of the slots, then cut them with a jigsaw or scroll saw.
  4. Cut the outline on the bandsaw, just outside the line. Sand to the line.
  5. Mark the bevel start (dashed line) and shape the top face to match the
     side section with a plane, spokeshave, or sanding drum.

FINISHING
  - Ease all edges except the scraping edge with sandpaper.
  - Finish with food-safe oil, such as mineral oil or a board butter.
  - Finish with a food-safe oil.

Units are millimetres throughout.
